Mello

PRODUCTS

Cylindrical Grinding Machine UNS-2/1500

Cylindrical Grinding Machine UNS-2/1500

UNS-2/1500 MODEL
GRINDING CAPACITY
Maximum distance between centres - 1500mm
Standard height of centres over the table - 200mm
GENERAL DATA
Grinding wheel dimensions - 355 x 50 x 127mm
Morse taper in workhead spindle - #5
Morse taper in tailstock centre - #4
Table total travel - 1635mm
Table horizontal swivel in both directions - 5º30’
Real wheelhead infeed per handwheel scale division - 0,0025mm
Workpiece related diameter wheelhead infeed per handwheel scale division - 0,005mm
Crosswise wheelhead rapid stroke - 40mm
Workhead continuous variable speed - 40rpm to 400rpm
Grinding wheel motor power - 5 HP
Net weight - 3400Kg

UNS-2/1500 MODEL
GRINDING CAPACITY
Maximum distance between centres - 1500mm
Standard height of centres over the table - 200mm
GENERAL DATA
Grinding wheel dimensions - 355 x 50 x 127mm
Morse taper in workhead spindle - #5
Morse taper in tailstock centre - #4
Table total travel - 1635mm
Table horizontal swivel in both directions - 5º30’
Real wheelhead infeed per handwheel scale division - 0,0025mm
Workpiece related diameter wheelhead infeed per handwheel scale division - 0,005mm
Crosswise wheelhead rapid stroke - 40mm
Workhead continuous variable speed - 40rpm to 400rpm
Grinding wheel motor power - 5 HP

Net weight - 3400Kg

Machine high stiffness structure;
Grinding wheel and workhead spindles assembled in sealed cartridges with angular contact high precision ball bearings P4 or ABEC 7 standards with permanent special grease lubrication;
Complete electro-electronic panel;
Oil-Hydraulic system with variable flow vane pump, electrovalves, hand operated valves, hydraulic piston for the table movement, tubings, couplings and hoses;
Variable speed 40 rpm to 400rpm workhead electronic drive;
Oil-hydraulic rapid wheelhead 40mm displacement in both directions allowing quick measuring interruptions and workpieces replacements;
High-stiffness tailstock;
Automatic lubrication; 
Standard painting with epoxy inks and the standard colours of grey, white and red;
Accuracy according to ISO2433 standard.

STANDARD ATTACHMENTS
01 Coolant system;
02 Grinding wheels (AA60K6V and AA46K6V);
02 Grinding wheel hubs, with balancing weights;
01 Grinding wheel hub ejector;
01 Balancing arbor;
01 Balancing stand;
01 Dressing diamond holder with independent infeed leadscrew for table or tailstock side assembling;
01 Carbide tipped Morse taper #5 centre, removable, for the workhead;
01 Carbide tipped Morse taper #4 centre, removable, for the tailstock;
01 Workhead driving pin;
03 Workpieces driving clamps for different diameters;
01 Set of levelling screws and resting pads;
01 Set of service wrenches;
01 Set of spare belts;

01 Instruction, handling and maintenance handbook in English.